Gatemaster | Surface-fixed digital lock | keypad on both sides
The Gatemaster surface-fixed digital lock is the surface-mounted version of the SelectPro code gate lock, with a keypad on both sides. A long latching movement allows for the gate expanding and contracting, and it fits by drilling three holes and screw fixing the lock to the gate.
Key features
- Keypad on both sides, no keys needed
- Surface-mounted version of the SelectPro code lock
- Long latching movement allows for gate movement
- Fits with three drilled holes
- Angle bracket can bridge a gap of up to 9/16"
Gatemaster surface-fixed digital lock with keypads on both sides
Digital gate locks are a convenient way of locking a gate because no keys are needed. This surface-mounted version of the SelectPro code gate lock has a keypad on both sides of the gate.
Built for moving gates
The lock has a long latching movement, which allows for the gate expanding and contracting. That makes it a good match for wooden gates, which move with the seasons.
Installation
Position the angle bracket on the edge of the gate; it may overhang by up to 9/16" to bridge a gap between gate and post. Drill three 3/8" holes through the gate for the keypad screws and the spindle, cut the M5 screws and the spindle to suit the gate thickness, then fix the keypad, bracket and lock, and fix the strike plate to the post.
Maintenance
Every three months, take the keypads off, spray the inside of the lock through the tumbler holes with WD-40 or an equivalent, and spray the fixings and the latchbolt. Then press every button and turn the handle a few times to check that the lock runs smoothly.
Specifications
| Brand | Gatemaster |
| Manufacturer | Gatemaster |
| Weight | 2.2 lb |
Installation
- 1Position the angle bracket on the edge of the gate (it can overhang the edge of the gate by up to 9/16" if needed to allow for a gap between the gate and the gate post) and mark three holes for the outside keypad fixing screws and the spindle. Remove the angle bracket and drill three 3/8" diameter holes through the gate
- 2Cut the two M5 screws and the spindle to length to suit the gate thickness. The M5 screws should be cut to the gate thickness less 3/8". The spindle should be cut to the gate thickness plus 2-5/8" for double-sided and plus 3-1/4" for single-sided locks
- 3Fit the outside keypad and the angle bracket with the M5 screws and insert the spindle, making sure it does not catch on the gate. Give the spindle plenty of clearance inside the hole - enlarge the hole if there is any risk of binding.
- 4Fix the angle bracket securely with screws through the 2 remaining countersunk holes.
- 5Place the lock on the spindle and fix it to the angle bracket with 2 x M8 countersunk screws.
- 6Test the lock to check that it operates freely.
- 7Fix the strike plate to the gate post.
Maintenance
Every 3 months: take the keypads off the lock, spray the inside of the lock through the tumbler holes at the back with WD-40 or an equivalent, and spray the fixings and the latchbolt as well. Then press every button and turn the handle a few times to check that the lock still runs smoothly.
Frequently asked questions
Will it survive outdoors all year?
It is built for it. The bodies are pressure die-cast and powder-coated, latchbolts are stainless steel and the keypads are marine grade, so salt air and rain are not a problem. Follow the maintenance schedule on this page - a spray of light oil a few times a year is what keeps a gate lock feeling new after a decade outside.
What warranty comes with this product?
Gatemaster gives a 5-year warranty on the Superlock 2.0 range and a manufacturer's warranty on the rest of the program, covering defects in material and workmanship. Keep your invoice: that is the proof of purchase a claim is assessed on. Damage from forcing, from the wrong installation or from missed maintenance is not covered - which is why the maintenance schedule on this page is worth following.
Is this in stock and how fast can I get it?
Gatemaster hardware is part of our standard program, so the common versions ship from stock. If you need a quantity for a project, or you are not sure which version fits your gate, ask us for a quote - we will check the frame size and handing with you before anything is picked.
How often does the lock need maintenance?
Every three months. Take the keypads off, spray the inside of the lock through the tumbler holes with WD-40 or an equivalent, spray the fixings and the latchbolt, then press every button and turn the handle a few times.
What types of fencing products does Fenceweb offer?
Fenceweb offers a complete range of fencing products, including welded wire fence panels, chain link fence, ornamental and metal fencing, security fencing, fence posts, swing and farm gates, gate hardware and temporary fencing. We also carry trusted brands such as Locinox, Gatemaster, ZND, AES Global, D&D Technology and Tarter.
Are all products in stock and ready for shipment?
The majority of our catalog is kept in stock and ships quickly from our warehouse. We do not publish a stock figure on the product pages, so ask our team and they will confirm availability and lead times for your order, especially a larger or custom one.
Still have questions? Call us at 214 878 1900