
Fenceweb now sells MWF Solutions metal privacy fence panels. MWF makes steel privacy fence in Fontana, California: boards that look like a wood fence, but never warp, rot or need staining. You can now order a complete MWF fence on Fenceweb.com, section by section, with a matching gate.
Every section comes as one kit with the posts, boards, channels or rails and caps in one order. Choose factory primer and paint it any color you like, or choose a Steelgrain woodgrain finish in Cedar, Walnut or Redwood that never needs paint. This article shows the four privacy systems, what a section costs, how to count what you need and how ordering works.
Who is MWF Solutions?
MWF Solutions makes steel fence in Fontana, California, from galvanized steel coil made by California Steel. Its fences are built to replace wood and vinyl: the same boards and the same look, in steel that does not burn, warp or rot.
Steel is noncombustible. MWF fence carries an ASTM E2768 Class A fire rating with zero flame spread, and CAL FIRE lists MWF Solutions under ignition-resistant materials (Listing #8170). MWF's steel walls are also Intertek dynamic wind load tested to 130 mph sustained winds with 190 mph gusts.

Four metal privacy fence systems
All four systems use the same 1" x 6" steel boards. What differs is how the boards are held and how the fence looks from the street.
- [Canfield](/brands/mwf-solutions?type=mwf-canfield): the simplest. The boards slide into a channel fixed to the post, 68" high, on 2-1/2" posts or heavier 4" posts. From $543.46 per 6' section.
- [Hayden horizontal](/brands/mwf-solutions?type=mwf-hayden): the boards sit in a 2" x 4" top and bottom rail between 4" x 4" posts, 69" high. A framed, straight fence line. From $779.85 per 6' section.
- [Hayden vertical](/brands/mwf-solutions?type=mwf-hayden): the same frame with the boards standing upright, 69" high. From $654.23 per 6' section.
- [Rimrock](/brands/mwf-solutions?type=mwf-dalton-and-rimrock): board on board. The boards alternate front and back in routed 4" x 4" posts, so the fence looks finished from both sides. No brackets, no screws. From $863.43 per 8' section.

Paint it any color, or choose Steelgrain woodgrain
Every MWF part comes with a coat of epoxy primer from the factory. The primer is a base coat, not the final color: after installation, paint the fence any color you like, specialty and trending colors included. MWF makes its primer to pair with durable water-based paints such as Sherwin-Williams Pro Industrial topcoat.
Would you rather not paint? Steelgrain Cedar, Walnut and Redwood are woodgrain finishes on galvanized steel. They give the warm look of a cedar or redwood fence and are never painted, stained or sealed.

Steel, wood or vinyl privacy fence?
- Upkeep: a wood fence needs staining and sealing every few years; MWF steel needs none of that, and Steelgrain is never painted.
- Lifespan: wood warps, splits and rots; vinyl can crack and fade. Steel does neither, and MWF backs the galvanized steel with a 30 year limited warranty.
- Fire: wood burns and vinyl melts. Steel is noncombustible and CAL FIRE listed, which counts in the zone right around a home where wildfire protection matters.
- Wind: MWF walls are wind load tested to 130 mph sustained winds with 190 mph gusts.
- Recycling: steel is 100% recyclable at the end of its life.
What does an MWF privacy fence cost?
A complete Canfield fence, posts, boards, channels and caps included, costs about $91 per foot in factory primer and $127 per foot in Steelgrain, before sales tax and delivery. Every kit page shows the price of a section in each color, so you see the total before you order.
Prices on Fenceweb are for the parts in the finish you choose. We quote the freight from MWF's plant in Fontana, California to your address after you order, and you approve it before anything ships.
How to order a complete MWF fence in three steps
Order a complete MWF fence section by section, with a gate to match. Before your order ships, we check the material list with you.
- 1. Choose your fence and color: Canfield, Hayden horizontal or vertical, or Rimrock, in primer or Steelgrain.
- 2. Count your sections: one Starter section for the first section of every straight run, then one Add-on section for every next section. Where the fence starts against a house or a wall, take a Wall starter section instead. A 48 ft run of Canfield is 1 Starter and 7 Add-on sections. Not sure? Send us a sketch with your lengths through Request a Quote and we count it for you.
- 3. Add a gate: a single swing gate to match, 68" high, with hinges and a latch. MWF builds the gate to your opening, from 36" to 48" wide.

Frequently asked questions
Does Fenceweb sell MWF Solutions fence?
Yes. Since November 2026 Fenceweb sells MWF Solutions steel privacy fence kits, gates and every part on its own, at fenceweb.com/brands/mwf-solutions.
What is a metal privacy fence panel?
A metal privacy fence panel is a section of fence made of steel or aluminum boards with no gaps, so it closes the view like a wood privacy fence. MWF sells it as a complete section: posts, boards, channels or rails and caps in one kit.
How tall is an MWF privacy fence?
Canfield is 68" high and Hayden is 69" high, in 6' wide sections. Rimrock comes in 8' wide sections. The matching gates are 68" high.
Can I paint an MWF fence?
Yes. Primer parts are made to be painted after installation, in any color you like. Steelgrain Cedar, Walnut and Redwood are woodgrain finishes that are never painted.
Can I install an MWF fence myself?
Yes. MWF designs its fences for easy installation without brackets or screws, and they adjust to uneven ground. You can do it yourself or hire a contractor. Every post goes in a concrete footing.
What warranty does MWF give?
MWF gives a 30 year limited warranty on the galvanized steel and a 10 year limited warranty on the factory primer coat, on the condition that a topcoat is applied at installation and maintained and that field cuts are sealed. MWF's warranty document has the full terms.
How long does delivery take?
MWF makes and ships every order from Fontana, California in about 4 weeks. We quote the freight to your address after you order, and you approve it before it ships.
Plan your MWF privacy fence with Fenceweb
Browse the full range on the MWF Solutions brand page, send us your lengths for a project quote, or call 214 878 1900 or email info@fenceweb.com. Comparing metal fence types first? Read Wrought Iron vs Aluminum vs Steel Fence. Fence contractors and dealers can open a company account for their own pricing.
