Fence cornerpost | 2-3/8" x 2-3/8" | (main)

Multi corner post 60 x 60 mm with fixing points for twin wire mesh

The Multi corner post is the steel corner post for twin wire mesh fences. Its fixing points are pre-positioned at the right heights for the 2" x 8" mesh, on two sides at a right angle, so the panels of both fence lines clip into place at the corner without measuring or drilling.

Sizes and lengths

Each post is 2' longer than the fence height: that part goes into the ground and gives the corner its rigidity.

• Profile: square 60 x 60 mm, steel
• Lengths: 1200, 1400, 1600, 1800, 2000, 2200, 2400, 2600, 2800 and 3000 mm
• Post length: fence height plus 600 mm
• Fixing points: two sides at a right angle, for 50 x 200 mm mesh

Materials and finish

Choose hot-dip galvanized, or galvanized and powder coated in moss green RAL 6005, fir green RAL 6009, anthracite gray RAL 7016 or black RAL 9005, the same finish as the panels.

Installation

Drive the post into the ground with a post driver, or set it in a hole dug with an auger or spade and anchor it with quick-setting concrete or concrete mortar. Where the post cannot go into the ground, use a base plate instead. Combine it with the Multi intermediate posts of the same system and finish with post caps.