Soundproof Fence
Noisecare acoustic fence modules absorb noise instead of bouncing it back. A stone-wool core behind steel mesh cuts traffic, machinery and HVAC noise on both sides of the fence. Choose Premium for absorption class A or Extreme for maximum insulation, in hot-dip galvanized, black or anthracite. The modules mount on our 3″ × 3″ steel posts, and we ship from Dallas, TX. Tell us the length, height and noise source, and we’ll quote your project. Read more
9 products
Noisecare Soundproof Fence | Premium | 17 dB
from $557.00
Noisecare Soundproof Fence | Extreme | 21 dB
from $647.00
Noisecare Soundproof Fence | Single Gate | 3′3″
from $4,035.00
Noisecare Soundproof Fence | Double Gate | 9′10″
from $7,140.00
Soundproof Fence
Fence post | 3" x 3" | 9 GA
from $70.00
Fence post cap | 3" x 3" | Steel
$2.50
Noisecare Soundproof Fence | Adjustment Profile
from $72.00
Noisecare Soundproof Fence | Self-Tapping Screws #14 × 1″ | 50 pcs
from $60.00
Noisecare Soundproof Fence | Sealing Tape | 26′
$44.00
Showing 1-9 of 9 products
Highlights
Absorbs, not reflects
Class A absorption with Premium: less echo on the noisy side, more quiet in your backyard.
Long walls along roads
From one backyard to hundreds of feet of wall along busy roads and new housing.
Screens HVAC equipment
Rooftop and ground enclosures around cooling units, heat pumps and generators.
Matching gates
Single and double gates with the same acoustic infill and finish, gate posts included.
Soundproof fence that absorbs noise
Most fences reflect sound. A Noisecare acoustic fence absorbs it: each module has a dense stone-wool core behind a breathable membrane and galvanized steel mesh, so traffic, machinery and HVAC noise are soaked up instead of bounced back. It gets quieter on both sides of the fence.
Premium or Extreme?
- Noisecare Premium | 17 dB: absorption class A, the choice for backyards, schools, parking and HVAC screens
- Noisecare Extreme | 21 dB: a steel plate between two layers of wool for maximum insulation along roads, rail and industry
Gates that keep the barrier closed
A soundproof fence is only as good as its weakest spot. Noisecare single gates (3′3″ wide) and double gates (9′10″ wide) carry the same acoustic infill, mesh and color as the fence, 5′11″ or 6′7″ high, and come with their own gate posts.
Heights, posts and installation
Modules are 94″ wide and 31″ or 39″ high. Stack two for a 5′3″ or 6′7″ fence, or three for up to 9′10″. The modules screw onto our 3″ × 3″ steel posts, 8′1″ on center, with 8 self-tapping screws per module; seal the joints with Noisecare sealing tape.
Colors, lead time and shipping
Hot-dip galvanized, black (RAL 9005) or anthracite (RAL 7016), with other RAL colors on request. Noisecare makes the modules to order in Denmark in 6 to 8 weeks; we ship them with posts and accessories from Dallas, TX. Tell us the length, height and noise source and we will quote your project.
Frequently asked questions
How much quieter will it be?
Premium blocks 17 dB (DLR) and absorbs 20 dB (DLα); Extreme blocks 21 dB. The result on site depends on height, length and how close the fence is to the noise. Taller and closer works better. Send us your situation and we’ll advise.
Which height do I need?
The fence should break the line of sight to the noise source. Most gardens use 3′3″ to 5′3″ (one or two modules). Taller fences, up to 9′10″, are available on request: we size the posts and footing for your site.
Which posts and how deep?
Use our 3″ × 3″ posts with a steel cap. As a rule of thumb, set a third of the post in concrete. See the post table on each product page, and ask us for taller fences.
How long is the lead time?
Noisecare modules are made to order in Denmark: 6 to 8 weeks plus ocean freight to Dallas. Posts and caps ship from stock.
Which colors are available?
Hot-dip galvanized, black (RAL 9005) and anthracite (RAL 7016). Other RAL colors are available on request.
How is it installed?
Set the posts, then lift the modules between them and screw each flange to the post (8 screws per module). Seal the joints with sealing tape and finish cut ends with an adjustment profile.
Still have questions? Call us at 214 878 1900