Mobile Fence

Mobile fence goes up without digging. Panels stand in tube stands, barriers stand on feet or on their own legs, and the units connect to each other instead of to posts. When the work moves, the fence moves with it: unclamp, carry, set down and clamp again.

That makes it the usual choice for construction sites, events, road and utility work, and any area that has to be closed off for weeks or months rather than for good.

Both ZND panels in this range are 6 ft x 12 ft square-top anti-climb panels. The difference is weight and crew size:

• Installer Plus ST612: 44.5 lb, set by a two-person crew, with no additional brace bar. Made for active construction sites, repeat rental use and installs that stay up for months.
• Installer Pro ST612V.LW: a lightweight panel of 34.6 lb that one installer can set, with a vertical brace bar. Made for smaller crews, pedestrian control and short to mid-term jobs.

Both have anti-climb welded wire mesh with tight vertical wire spacing in a pre-galvanized frame of 1.3" steel tube, joined with ZND SmartWeld construction. A damaged weld can be repaired with a standard spot welder. Both fit ZND tube stands, couplers, anti-lift brackets, stabilizers and Z-Block weights.

The ZND barriers are all 7'6" wide and 3'9" high, with vertical bar infill in a tube frame. Each one links to the next with a hook and loop style connection that resists unauthorized removal.

• Bar Barrier, Heavy Duty: hot-dip galvanized, 38.6 lb, for barriers that are loaded, moved and set again many times.
• Bar Barrier, Lightweight: pre-galvanized, 19.2 lb, light enough for one person. Order it with flat feet.
• Fixed Leg Barrier, Heavy Duty: hot-dip galvanized with integrated legs, 34 lb, for longer and semi-permanent lines.
• Fixed Leg Barrier, Lightweight: pre-galvanized with integrated legs, for short events and layouts that change often.

For people, the ZND Pedestrian Gate 6 ft Anti-Climb gives the line a clearly marked entry that accepts a padlock.

For vehicles, the ZND Vehicle Gate Conversion Kit turns two standard panels into a double swing gate. It contains four gate hinge couplers, a male and a female gate latch and two gate wheel assemblies, and the full kit weighs 128 lb. The hinge coupler, both latch halves and the wheel assembly are also sold separately as spares or for a gate of your own layout.

This range also lists Capra Temporary Security Fence in three versions: Straight, Boom and Y-Boom. Each product page gives the details of that version. Where no price is shown, ask us for a quote for your site.

Where noise is the problem rather than access, the mobile soundproof fence is a noise barrier that is set up and moved like temporary fence. It is also listed in the Temporary Soundproof Fence category.

1. Mark the line and the gate openings before the first panel goes down.
2. Set a tube stand for each panel and stand the panels in them.
3. Clamp neighboring panels with couplers at the top and the bottom of every joint.
4. Add stabilizers, anti-lift brackets or Z-Block weights on exposed stretches.
5. Hang the gates last, then check that every latch closes and takes a padlock.
6. To move the fence, work in reverse: unclamp, carry the panels to the new line and set them again.

Tell us the length of the line, the number of gates and how long the fence will stand, and we can list the panels, stands and parts. A size without a price on its product page is sold on request. Fenceweb delivers to every US state and to Canada.